OSHA Guide – Cranes and Derricks in Construction
MENU
- Introduction
- Employer Responsibilities
- Section 1400 – Scope
- Section 1401 – Definitions
- Section 1402 – Ground Conditions
- Sections 1403-1406 – Assembly and Disassembly
- Sections 1407-1411 – Power Lines
- Section 1412 – Inspections (with Section 1435(f)-Tower Crane Inspections) and Section 1436(p)-Derricks Inspections)
- Section 1413 – Wire Rope Inspection
- Section 1414 – Wire Rope – Selection and Installation Criteria
- Sections 1415 Safety Devices & 1416 Operational Aids
- Section 1417 – Operation
- Section 1418 – Authority to Stop Operation
- Section 1419-1422 – Signals
- Section 1423 – Fall Protection
- Section 1424 – Work Area Control
- Section 1425 – Keeping Clear of the Load
- Section 1426 – Free Fall and Controlled Load Lowering
- Section 1427 – Operator Qualification and Certification
- Section 1428 – Signal Person Qualifications
- Section 1429 – Qualifications of Maintenance & Repair Employees
- Section 1430 – Training
- Section 1431 – Hoisting Personnel
- Section 1432 – Multiple-Crane/Derrick Lifts
- Section 1433 – Design, Construction and Testing
- Section 1434 – Equipment Modifications
- Section 1435 – Tower Cranes
- Section 1436 – Derricks
- Section 1437 – Floating Cranes/Derricks and Land Cranes/Derricks on Barges
- Section 1438 – Overhead & Gantry Cranes
- Section 1439 – Dedicated Pile Drivers
- Section 1440 – Sideboom Cranes
- Section 1441 – Equipment with a Rated Hoisting/Lifting Capacity of 2,000 Pounds or Less
- Directory of States with Approved Occupational Safety and Health Programs
- Workers’ Rights
- OSHA Assistance, Services and Programs
- OSHA Regional Offices
- NIOSH Health Hazard Evaluation Program
Section 1429 – Qualifications of Maintenance & Repair Employees
Improper crane maintenance and repair can lead to dangerous equipment failure. To ensure that maintenance and repair employees are qualified to perform their assigned tasks, this section requires maintenance and repair personnel to meet the definition of a qualified person with respect to the equipment and maintenance/repair tasks they perform. The definition of “qualified person” is found in section 1401.
Some maintenance and repair tasks may require the maintenance and repair personnel to operate the equipment to diagnose a problem or check its operation. Such personnel need not be qualified or certified under section 1427 to operate the equipment as long as the following requirements are met:
- The operation is limited to those functions necessary to perform maintenance, inspect the equipment, or verify its performance, and
- The personnel either:
- Operate the equipment under the direct supervision of an operator who meets the qualification/certification requirements of section 1427, or
- Are familiar with the operation, limitations, characteristics, and hazards associated with the type of equipment
