|
ASP-138 Free Flo Threaded Stud (Large Shank)
Standard Material is Mild Carbon Steel. When Thread Diameter Must
be Smaller than shown, Alloy Steel can be used.
Metric Threaded Studs Are Also Available. Also available in Stainless.
Wrench Flats are located at the end of the stud as shown. Wrench flats
could be applied at the inside of the threads, adjacent to the end of
dimension "E".
|
Part #
ASP-138 |
W/R Dia. |
"A" |
"B" |
"C" |
"D" |
"E" |
Thd. Dia. |
Thd.
UNC |
Thd. UN
or UF |
Wt. 100 |
|
|
|
|
|
|
|
|
|
|
|
| -8 |
1/4" |
.50" |
4.72" |
.39" |
.39" |
1.50" |
1/2" |
13 |
20 UNF |
25.0 |
| -10 |
5/16" |
.63" |
5.72" |
.44" |
.50" |
1.75" |
5/8" |
11 |
18 UNF |
44.0 |
| -12 |
3/8" |
.75" |
6.75" |
.50" |
.63" |
2.00" |
3/4" |
10 |
16 UNF |
87.0 |
| -14 |
7/16" |
.88" |
7.66" |
.50" |
.75" |
2.25" |
7/8" |
9 |
14 UNF |
116.0 |
| -16 |
1/2" |
1.00" |
8.56" |
.63" |
.88" |
2.50" |
1" |
8 |
12 UNF |
170.0 |
| -18 |
9/16" |
1.13" |
9.63" |
.63" |
1.00" |
2.75" |
1-1/8" |
7 |
12 UNF |
238.0 |
| -20 |
5/8" |
1.25" |
10.66" |
.63" |
1.13" |
3.13" |
1-1/4" |
7 |
12 UNF |
289.0 |
| -24 |
3/4" |
1.50" |
12.69" |
.75" |
1.38" |
3.75" |
1-1/2" |
6 |
12 UNF |
552.0 |
| -28 |
7/8" |
1.75" |
14.63" |
1.00" |
1.50" |
4.38" |
1-3/4" |
5 |
12 UN |
1070.0 |
| -32 |
1" |
2.00" |
16.66" |
1.00" |
1.75" |
5.00" |
2" |
4.5 |
8 UN |
1290.0 |
| -36 |
1-1/8" |
2.25" |
18.63" |
1.25" |
2.00" |
5.63" |
2-1/4" |
4.5 |
8 UN |
1753.0 |
| -40 |
1-1/4" |
2.50" |
18.63" |
1.25" |
2.25" |
6.25" |
2-1/2" |
4 |
8 UN |
2344.0 |
| -44 |
1-3/8" |
2.75" |
22.53" |
1.50" |
2.50" |
6.88" |
2-3/4" |
4 |
8 UN |
3257.0 |
| -48 |
1-1/2" |
3.00" |
24.25" |
1.50" |
2.75" |
7.50" |
3" |
4 |
8 UN |
4152.0 |
| -56 |
1-3/4" |
3.50" |
28.63" |
1.75" |
2.75" |
10.00" |
3" |
4 |
8 UN |
5886.0 |
| -60* |
1-7/8" |
3.50" |
31.50" |
2.00" |
2.75" |
12.00" |
3" |
4 |
8 UN |
6176.0 |
| -64* |
2" |
3.50" |
|
2.00" |
3.25" |
As Req'd. |
3-1/2" |
4 |
8 UN |
|
| -72* |
2-1/4" |
4.00" |
|
2.00" |
3.75" |
As Req'd. |
4 |
4 |
8 UN |
|
* Design of Stud Per Requirements of Application*
Right Hand UNC-2A Threads are Standard. Left Hand Threads are Available.
All Threaded Studs supplied without Wrench Flats Unless Specified.
1-800-211-1379 Fax 1-216-676-6761
|
